TEST METHOD:
ASTM F2765-09: Standard Specification for Total Lead Content in Synthetic Turf Fibers
SCOPE OF TEST:
A section of the synthetic fiber was selected for testing and prepared as outlined in EPA Method 3052, with a temperature modification adjusted to 210oC. The fiber was then analyzed for lead using ICP spectroscopy or AAS spectrometry per ASTM E1613.
ACCEPTANCE LEVEL:
The total lead content measured shall be <300 mg/kg (ppm) was outlined in CPSC Improvement Act 2008 Statutory Lead Limit.
TEST LEVEL:
The above synthetic turf fibers are in compliance with CPSC lead content guidelines.
| YARN IDENTIFICATION | LEAD/ASTM F2765 @ 210°C |
|---|---|
| Monofilament Yarn | Less than 0.25 mg/Kg |
| Thatch Yarn | Less than 0.25 mg/Kg |
